Yes we can. However, we recommend templating the design prior to manufacturing in order to eliminate any costly mistakes.

Templating is a method involving the use of a flexible material which is cut to the exact dimensions of your worktops, sink and hob cut outs. This ensures that your stone will be a perfect fit during installation. Templating involves removing the existing worktops and disconnecting your sink and hob. We can offer this service if you require.

Yes, but as the stone may be quarried at different times we cannot guarantee a colour match.

Yes. We feel that is important that you see the stone before you finalise your choice and we can offer this service in our home visit.

The most popular choice is five at a length of 400mm at either one or both sides of the sink. But it depends on the aesthetics of your kitchen and of course it is up to you.

30mm is the most common choice, with 20mm for up stands and splash backs. However we can provide 40mm worktops.

Yes, Most kitchens will be strong enough, but the area around the sink may need strengthening. If you have any doubt we would be pleased to discuss this in a home visit.

Granite shouldn’t get stained from liquids or damaged from hot utensils and sharp objects, but to minimise the risk of staining, we treat the surface with a sealer. However, Marble is a much softer stone and if you want to use it in the kitchen, care must be taken especially with liquids such as red wine and beetroot. We recommend that any spillage be cleaned up immediately.

We can provide T profile, X profile and V profile.

T Profile	X Profile	V Profile

Yes we offer our services to both commercial and domestic clients.

Yes the joints will be visible but discreet no wider than 3mm.

Sinks are bonded to the stone with a two part adhesive and a silicone seal Is applied around the sink to prevent leakages.